R9 280x flashed with EFI

[igorjos]

Hi everybody!
Can somebody help me please.
I have two R9 280x video cards and i want to flash them to use with Mac Pro.
First one is ASUS R9 280 DirectCU II TOP (R9280-DC2T-3GD5) loks like it is 1 revision.(Not a X version)
Second one is GIGABYTE R9 280X WindForce 3X OC (GV-R928WF3OC-3GD Rev.1).
I am attaching original roms dumped from that cards.
Can somebody make a roms with efi for me please or maybe tell me how to do that or just gave me some link where i can find info.
Thanks a lot in advance

[igorjos]

Can someone tell me how to make a efi part for this cards to flash with my original roms.
Or may be tell me how to do ,the all process

[vinnie1978]

Read this topic http://forum.netkas.org/index.php/topic,5619.0.html
Everything you want to know is in there, that's the way i learned it.

[windosmac]

I've been trying to flash a Toxic R9 280x but haven't had any luck. Initially I used Netkas script but it was incompatible with my installation of Python (3.x), I was unsuccessful at refactoring the script for Python3 (not a python dev unfortunately), didn't want to try downgrading/versioning between Python2&3. I somewhat successfully copied and pasted the EFI code over the cards original code; "somewhat successful" in that upon booting I am able to see the loading bar from "0% to 100% however, I've not been able to access to the startup manager/bootscreen. I've flashed a handful of cards in the past all without issue so I'm not really sure what the issue is with this one. I've also tried the (EFI'd) Toxic R9 280x ROM posted earlier in this thread, that did not work either. I've tried flashing both rom-switch positions, it seems that only one will accept a flash, is this normal?

Some background info:
I'm flashing with Freedos/DosATIFlash on a 5,1 Mac Pro
macOS boot disk is some kind of PCIe ssd from a Macbook (I forget which one exactly)
Running macOS 10.14.2
Card is a reference card (two mDP, two DVI, one HDMI)
Using an wired Apple keyboard plugged directly into the tower
27" A1316 Cinema Display connected via mDP (both mDP work during/after bootscreen)

Attached my original rom and my copy/paste-modified rom if anyone cares to take a look. Any ideas/help is appreciated.

I also have a A1407 Thunderbolt Display that I've been trying to use via a GC Alpine Ridge, and GC Titan Ridge. The Titan Ridge does not recognize the A1407 in Windows 10, the Alpine Ridge does but doesn't recognize the A1316 if it is daisy chained. I'd like to be able to access bootscreens so I can "warm boot" back into macOS and see how the cards behave (a thread on Mac Rumors indicates this method is required for macOS to recognize the card).

[windosmac]

I tried again today, this time using the 7970efi.rom posted by Rominator here: http://forum.netkas.org/index.php/topic,5619.msg19874.html#msg19874. I tried the flashing with the file posted, worked pretty well (showed entire loading bar, and loaded at a "normal" speed) but still no boot screen access. Then I tried copy/pasting the EFI part of that file over my original rom. I can still see the entire loading bar but this time it loads very quickly (blink and you might miss the chance to hold option / command+R); still no boot screen access. The former did however show up as AMD Radeon HD 7970 in system profiler. Step in the right direction but still not great, attached the latter if anyone cares to take a look.

edit: on further examination I see that the Sapphire Toxic R9 280x isn't quite a reference card given that it has two DVIs (in addition to the two mDP and HDMI). I think now I'll start reading through the port mapping thread again and see if I can't find any hints there.

[igorjos]

Read this topic http://forum.netkas.org/index.php/topic,5619.0.html
Everything you want to know is in there, that's the way i learned it.

Thanks a lot for your help. I have flashed  GIGABYTE R9 280X WindForce 3X OC (GV-R928WF3OC-3GD Rev.1) (now boot screen on all ports).
But i can find EFI part for ASUS R9 280 DirectCU II TOP (R9280-DC2T-3GD5) (it is not a X version) to make a working rom.
I do not know how to chop EFi part witch i found in Mr. Zarniwoop on page 11 in Reply #154. Can someone help me to chop EFI part for R9 280. I attached Mr. Zarniwoop MSI R9 280 Gaming 3G rom

[vinnie1978]

I extracted the .efi part from the above posted .rom file, see the attached file

[snookerap]

@ 3mvideo & wax2012

check your PM (messages). I sent you something.
I flashed 4 of those Gigabyte Rev 2.0 cards for myself and my buddies. Everything (bootscreen, miniDP etc) is working fine so far.

Hi, i have the same graphics-card. can you send me the bios?

thanks...

[erodri1]

Thanks for the script. I flashed my Gigabyte R9 280X Reference, and I got boot screen. All ports seem to be working perfectly. I extracted my original BIOS from the card using ATIWinFlash then I went back to Mac OS X and ran Netkas script using the Terminal and changing the parts of the command line to match the name and location of my files. Rather than entering by typing the location of my "bundle" folder, I typed c + d + SPACE and dragged the folder to the terminal window. In that way terminal will add the path automatically, then I pressed "ENTER" to go to that directory (actually, I read somewhere that cd = change directory). Once I was into the directory I typed the modified command line from the "README" filed in Netkas folder and pressed enter to run it.

It worked like a charm, giving me a file with extensions like "filename.rom.efi.rom." I went back into Indos 10 and flashed that file to my GPU and then booted back into OS X. The card showed boot screen the first time with no problems.

Thanks for the script and the discussion. Long live MacPro 4,1 and 5,1!