netkas.org forum
November 15, 2018, 06:06:48 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Information for registering users http://forum.netkas.org/index.php/topic,2246.0.html
 
   Home   Help Search Login Register  
Pages: 1 ... 28 29 [30] 31 32 ... 34
  Print  
Author Topic: Mac Pro 2006-2007 Firmware Tool Released  (Read 734074 times)
AnotherDesign145
Newbie

Offline Offline

Posts: 3


« Reply #435 on: April 05, 2015, 12:09:38 AM »

Hi all, as I am now upgraded to Firmware 2.1 I here are a few tips.

The program does a ping to determine internet connectivity, I needed to switch this off on the wireless router from my IP. and switch it off on my computer.

For MP11.88Z.005C. B08. 0707021221 I used the Firmware tool on the 1st post

On my desktop  I had various versions of the Apple 2.1 firmware
One was the 'package', one was labelled 'MacProFirmwareUpdate 1.2 2.dmg', one 'EFi2007.dmg'. I do not know which the Firmware Tool located and used but it worked.

Having clicked on 'Upgrade to 2007 Firmware', there was a window of instructions and I continued. I saw nothing happen, but another poster wrote that the progress screen took about 1sec. I waited 20minutes!!!! and then switched off. Rebooted holding the power switch until the light flashed and there was a long beep. A grey screen with a dark grey apple logo appeared with a thick progress bar . There was then a black screen for 2 secs, a chime and then a grey screen, + apple logo and the thin progress bar of Yosemite. Having finished booting, I switched off and repeated the boot up with the power switch.

Firmware 2.1 is now installed. The x5365 processors show correctly and at 64 bit the Geekbench score is 1701 Single Core and 11782 Multi Core

Sincere thanks to MacEFIRom who wrote the initial program and to everyone who has contributed to this post......Success for one more!
Logged
atlshogun
Newbie

Offline Offline

Posts: 1


« Reply #436 on: April 10, 2015, 01:37:20 PM »

Got a Mac Pro 1,1 that I just updated with the firmware tool to support my dual Xeon 5345s. Now I get kernel panics every day with 10.7.5. Here is my error log. Any thoughts? I have reset pram. My memory tests fine. And my gpu has been successfully flashed with the apple bios. I also tried a pair of e5355 but they panic as well. So I am ruling out faulty cpus. Also, the computer does not crash as long as it is in idle. It will run for days as long as it does nothing. I have installed the cpus properly and put quality thermal paste on them both.

InInterval Since Last Panic Report:  428607 sec
Panics Since Last Report:          2
Anonymous UUID:                    11E35FAD-3C53-4700-9079-99392A856D53

Fri Apr 10 08:14:05 2015
Machine-check capabilities (cpu 2) 0x0000000000000806:
 family: 6 model: 15 stepping: 11 microcode: 0
 Intel(R) Xeon(R) CPU           E5345  @ 2.33GHz
 6 error-reporting banks
 threshold-based error status present
Machine-check status 0x0000000000000005:
 restart IP valid
 machine-check in progress
MCA error-reporting registers:
 IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
 IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
 IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
 IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
 IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
 IA32_MC5_STATUS(0x415): 0xb200000084200e0f valid
  MCA error code:            0x0e0f
  Model specific error code: 0x8420
  Other information:         0x00000000
  Threshold-based status:    Undefined
  Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
panic(cpu 0 caller 0x2cf3cc): "Machine Check at 0x00007409, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x80010033, CR2: 0x839f0000, CR3: 0x00100000, CR4: 0x00000660\n" "EAX: 0x06403040, EBX: 0x0000040e, ECX: 0x0000002f, EDX: 0x03d02040\n" "ESP: 0xbffff840, EBP: 0xbffff8e8, ESI: 0x0660a56c, EDI: 0x03d02070\n" "EFL: 0x00000202, EIP: 0x00007409\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x818d98 : 0x2203de (0x6b08cc 0x818db8 0x229fb0 0x0)
0x818dc8 : 0x2cf3cc (0x6bde94 0x6bdfc8 0x7409 0x12)
0x818f38 : 0x2cf409 (0x818f70 0xde 0x6bdfc8 0x1)
0x818f58 : 0x2e6182 (0x818f70 0x0 0x0 0x0)

BSD process name corresponding to current thread: setiathome_7.00_

Mac OS version:
11G63

Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
System model name: MacPro2,1 (Mac-F4208DC8)

System uptime in nanoseconds: 4985371696752
last loaded kext at 1049589110820: com.apple.filesystems.smbfs    1.7.2 (addr 0x1c80000, size 249856)
last unloaded kext at 149538576420: com.apple.driver.CSRHIDTransitionDriver    4.0.8f17 (addr 0x10b8000, size 12288)
loaded kexts:
com.apple.filesystems.smbfs    1.7.2
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AudioAUUC    1.59
com.apple.kext.ATIFramebuffer    7.3.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AppleMCEDriver    1.1.9
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.ATIRadeonX3000    7.3.2
com.apple.driver.AppleLPC    1.6.0
com.apple.filesystems.autofs    3.0
com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AppleIntel8254XEthernet    2.1.3b1
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AirPortBrcm43224    501.36.15
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleUSBUHCI    5.1.0
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.kext.ATI5000Controller    7.3.2
com.apple.kext.ATISupport    7.3.2
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.kext.triggers    1.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOATAPIProtocolTransport    3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
Model: MacPro2,1, BootROM MP21.007F.B06, 8 processors, Quad-Core Intel Xeon, 2.33 GHz, 16 GB, SMC 1.7f10
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
PCI Card: ATI Radeon HD 5770, ATY,VervetParent, Slot-1
Serial ATA Device: WDC WD740ADFS-00SLR5, 74.36 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 3
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x5d100000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0302, 0x5d110000 / 5
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x5d130000 / 4
USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52b, 0x3d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed

terval Since Last Panic Report:  428607 sec
Panics Since Last Report:          2
Anonymous UUID:                    11E35FAD-3C53-4700-9079-99392A856D53

Fri Apr 10 08:14:05 2015
Machine-check capabilities (cpu 2) 0x0000000000000806:
 family: 6 model: 15 stepping: 11 microcode: 0
 Intel(R) Xeon(R) CPU           E5345  @ 2.33GHz
 6 error-reporting banks
 threshold-based error status present
Machine-check status 0x0000000000000005:
 restart IP valid
 machine-check in progress
MCA error-reporting registers:
 IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
 IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
 IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
 IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
 IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
 IA32_MC5_STATUS(0x415): 0xb200000084200e0f valid
  MCA error code:            0x0e0f
  Model specific error code: 0x8420
  Other information:         0x00000000
  Threshold-based status:    Undefined
  Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
panic(cpu 0 caller 0x2cf3cc): "Machine Check at 0x00007409, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x80010033, CR2: 0x839f0000, CR3: 0x00100000, CR4: 0x00000660\n" "EAX: 0x06403040, EBX: 0x0000040e, ECX: 0x0000002f, EDX: 0x03d02040\n" "ESP: 0xbffff840, EBP: 0xbffff8e8, ESI: 0x0660a56c, EDI: 0x03d02070\n" "EFL: 0x00000202, EIP: 0x00007409\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x818d98 : 0x2203de (0x6b08cc 0x818db8 0x229fb0 0x0)
0x818dc8 : 0x2cf3cc (0x6bde94 0x6bdfc8 0x7409 0x12)
0x818f38 : 0x2cf409 (0x818f70 0xde 0x6bdfc8 0x1)
0x818f58 : 0x2e6182 (0x818f70 0x0 0x0 0x0)

BSD process name corresponding to current thread: setiathome_7.00_

Mac OS version:
11G63

Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
System model name: MacPro2,1 (Mac-F4208DC8)

System uptime in nanoseconds: 4985371696752
last loaded kext at 1049589110820: com.apple.filesystems.smbfs    1.7.2 (addr 0x1c80000, size 249856)
last unloaded kext at 149538576420: com.apple.driver.CSRHIDTransitionDriver    4.0.8f17 (addr 0x10b8000, size 12288)
loaded kexts:
com.apple.filesystems.smbfs    1.7.2
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AudioAUUC    1.59
com.apple.kext.ATIFramebuffer    7.3.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AppleMCEDriver    1.1.9
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.ATIRadeonX3000    7.3.2
com.apple.driver.AppleLPC    1.6.0
com.apple.filesystems.autofs    3.0
com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AppleIntel8254XEthernet    2.1.3b1
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AirPortBrcm43224    501.36.15
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleUSBUHCI    5.1.0
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.kext.ATI5000Controller    7.3.2
com.apple.kext.ATISupport    7.3.2
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.kext.triggers    1.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOATAPIProtocolTransport    3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
Model: MacPro2,1, BootROM MP21.007F.B06, 8 processors, Quad-Core Intel Xeon, 2.33 GHz, 16 GB, SMC 1.7f10
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
Memory Module: DIMM Riser B/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8551, 0x373254323536343230484641335342202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
PCI Card: ATI Radeon HD 5770, ATY,VervetParent, Slot-1
Serial ATA Device: WDC WD740ADFS-00SLR5, 74.36 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 3
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x5d100000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0302, 0x5d110000 / 5
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x5d130000 / 4
USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52b, 0x3d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed


Logged
62mario
Not Newbie
*
Offline Offline

Posts: 5


« Reply #437 on: April 11, 2015, 11:06:46 AM »

Salve a tutti, ho cambiato la cpu del mio Mac pro da " dual core" a Quad core con X5365, ora vorrei aggiornarlo a 2.1, potete aiutarmi? grazie
Logged
Charlan7
Not Newbie
*
Offline Offline

Posts: 5


« Reply #438 on: April 11, 2015, 07:42:21 PM »

Salve a tutti, ho cambiato la cpu del mio Mac pro da " dual core" a Quad core con X5365, ora vorrei aggiornarlo a 2.1, potete aiutarmi? grazie

Facile; post #1 and use the tool.
Logged
62mario
Not Newbie
*
Offline Offline

Posts: 5


« Reply #439 on: April 12, 2015, 03:50:15 PM »

Puoi essere più preciso? Grazie
Logged
62mario
Not Newbie
*
Offline Offline

Posts: 5


« Reply #440 on: April 12, 2015, 03:54:56 PM »

Puoi essere più preciso? Grazie
Grazie, ho trovato, domani provato.
Logged
62mario
Not Newbie
*
Offline Offline

Posts: 5


« Reply #441 on: April 13, 2015, 11:13:09 AM »

Tutto bene, installato e funzionante, ora è diventato 2.1, grazie.
Logged
62mario
Not Newbie
*
Offline Offline

Posts: 5


« Reply #442 on: April 14, 2015, 10:29:04 AM »

Salve, potete dirmi se il firmware è esatto?

Nome modello:   Mac Pro
  Identificatore modello:   MacPro2,1
  Nome processore:   Quad-Core Intel Xeon
  Velocità processore:   3 GHz
  Numero di processori:   2
  Numero totale di nuclei:   8
  Cache L2 (per processore):   8 MB
  Memoria:   10 GB
  Velocità bus:   1,33 GHz
  Versione Boot ROM:   MP21.007F.B06
  Version SMC (sistema):   1.7f10
Hardware UUID:   00000000-0000-1000-8000-0017F20740E6


Grazie.
Logged
Charlan7
Not Newbie
*
Offline Offline

Posts: 5


« Reply #443 on: April 16, 2015, 11:01:00 AM »

Si, tutto esatto!
Logged
MacLad
Newbie

Offline Offline

Posts: 1


« Reply #444 on: April 21, 2015, 06:49:48 PM »

Hi, years after the initial first posting, i have successfully updated the firmware on my Mac Pro 2006 beast with no problems.

I upgraded the standard dual core processors for E5355 Quad Cores, running Lion O/S and with a pc ATI Radeon HD 5000 graphics card and the Mac is running beautifully. Mind you, i did use quality thermal paste and took time to tighten the coolers diagonally and gradually on each side to avoid distortion.

Anyway, upgrade and firmware upgrade highly recommended by a Mac novice.

Thanks.

Logged
cafed00d.ninja
Newbie

Offline Offline

Posts: 2


« Reply #445 on: May 06, 2015, 04:19:41 PM »

I posted a while ago about attempting a 1,1 upgrade.  Fortunately, I had the "easy-going" version of the firmware that was easy to upgrade.

My notes are:

1) Download firmware-upgrade in OP.
2) Perform firmware upgrade (before touching hardware).
3) Shutdown.
4) Power up--HOLDING the power button until flashing-lights.
5) Hear loud "bong" and wait for firmware to upgrade...
6) ...Wait for boot.  (When booted, took a look at System Profiler, and took some screenshots)
7) REBOOT (When booted for second time, took another look at System Profiler, sshot)
Cool Upgrade CPU.

==== Upgrade Hardware ====
a) Open case.
b) Clean with compressed air (with all cards and memory in--helps prevent dust from getting into slots).
c) Remove HD #1 and #2, video card, memory daughter cards.
d) Unscrew (4 screws) memory card cage.
e) Take off CPU fan cover.
f) Unscrew front fan assembly.
g) Remove front fan assembly (have to use spare PC PCI slot clover on the "bottom side").
h) UNPLUG HEAT SINK TEMPERATURE connectors to motherboard.
i) Unscrew and remove heat sinks.
j) Clean heat sinks of dust and old thermal grease.
k) "Tint" heak sink surfaces.
l) Clean with compressed air again (last place you want dust is in the CPU sockets).
m) Wait for air currents in/near case to settle...
n) Remove CPU-1, clean off old thermal grease, and tint.
o) Remove CPU-2, clean off old thermal grease, and tint.
p) Put both CPUs back in.
q) Apply "horizontal" thermal grease per Arctic Silver recommendation (I use MX-5 compound).
r) Reattach heat sinks.
s) RECONNECT HEAT SINK TEMPERATURE connectors to mobo.
t) Reattach front fan assembly, CPU fan cover, and memory card cage.
u) Reinstall cards, drives, and memory daughter cards.
v) Reboot.
====

To clarify, I first bought a pair of used x5355s, which were advertised as SLAEG, but weren't when I received them.  Those were returned.  I cared about the specific "matched pair" steppings because of the thermal properties; my understanding (admittedly shallow on the subject) is that the SLAEG/SLAED (see below) steppings can consume less energy when idle, which is important to me because 1) I rarely have turned this machine off since 2006 and 2) I do a ton of work from home, and ambient temps can get up to 75/80-deg-F (i.e., not inside an air-conditioned office).  Also, AFAIK, both CPUs have to have the same stepping (i.e., this is what I believe is meant by the term "matched pair") to realize the temperature/energy-use gains.

Then, I found a pair of used x5365s on eBay, which were advertised as "matched pair SLAED", and actually were SLAED.  So, CPU speed upgrade and matched pair found.  Have been running on new procs for a week (with 2,1 firmware).  No panics, all is well.  Downloaded SMCFanControl, and have 3 tiers: "Default" (do whatever the OS wants), "Medium" - 1000 rpm, and "Medium High" - 1500 rpm.  Each tier sets all 3 fans (CPU_MEM, I/O, EXHAUST) to the same speed (e.g., 1000 rpm on all 3 fans on "Medium").

Plays games (e.g., Steam Civ 5) fine, does my development work fine (Android, web), and does photography fine (Adobe Lightroom 3.6, PS CC; I still have Snow Leopard, and never plan to upgrade on this mac).  I have two 30" ACDs, and expect to keep using this computer for another 5 years (or maybe until the 32-bit UNIX epoch ends!).

Thanks to the OP for the firmware upgrade, and all those who contributed their experiences!!
Logged

MacPro 1,1 - Quad-core 3.0 GHz, 24 GB RAM, SSD boot, 8 TB RAID-0, Radeon 4870
HackPro 3,1 - Shuttle SH55J2, Quad-core i5, Radeon 6850
MacBook Pro Late 2011, OWC data-double SSD
DavNeil
Not Newbie
*
Offline Offline

Posts: 7


« Reply #446 on: May 06, 2015, 05:05:16 PM »

I have tested this myself, on a 2006 Mac Pro. You can upgrade or downgrade at will. If you have a CPU or CPUs in a 2007 Mac Pro that isn't supported in the 2006 Mac Pro, the system will not boot after the update until a compatible CPU or CPUs are installed. The program checks the Mac Pro model and will only install the 2007 Mac Pro firmware on a 2006, or the 2006 Mac Pro firmware on a 2007, whichever is appropriate. If you have a 2007 Mac Pro, the program will warn you about downgrading, but will still allow the firmware update. The download does not contain any firmware updater files or image files. The program creates a small RAM disk, downloads the needed files, copies all of the scripts to the RAM disk, and then runs the scripts. Everything is left on the RAM disk for you to look at and study, if needed.

The SMC version will stay at whatever version it was at before the update, and I'm looking into a SMC firmware tool, as it is also an EFI program that runs during the boot process. If I'm successful with that I will post a utility for that, although many people have upgraded the dual core Xeons in the 2006 to quad core Xeons without any ill effects, so I don't know how important this really is.

I'm also going to work on a utility for the iMac4,1 and iMac5,1, as there is a RAM limit that can broken if the firmware is updated. There have also been requests for a MacMini1,1 and MacMini2,1 utility, but the installer file from Apple has only one firmware image in it, so this one I don't understand.

I hope you enjoy the benefits of extending the value of your 2006 Mac Pro, or being able to change your system back and forth for development purposes.


Hi, I haven't trawled the entire message board, but my 2,1 firmware update didn't work which is a real shame as I have swapped out the original chips for the X5365s. Would anyone know, could this failed attempt be due to the fact I have hacked the Boot.fi to run yosemite (64Bit boot.efi)?

I have tried installing several times and reset the SMC twice.

Thx

Install on other HDD some supported version and use that to troubleshoot.
Logged
minicooperscooter
Newbie

Offline Offline

Posts: 1


« Reply #447 on: May 07, 2015, 06:11:37 PM »

VERY late to the party, but desperately trying to figure this out...

I have the tool, and it does indeed try to head out to the web for its payload, which I cannot see into since the script was made read-only.  I have not yet sniffed out where it is headed and what it expects to find, but I'm confident something's changed - whatever site and file name it expects to see it can't, and so it reports (after trying for about 30 seconds) that the app has no Internet access.

Does anyone know WHICH file, if left on the desktop, the app will use (as posted earlier in this thread)?  And if not, does anyone know where on the web the app is headed, and what file name it is asking for?  I can fake out those things easily enough, if I knew for sure what it was hoping to find!

Can anyone lend a hand here.  I know, I know - it's May of 2015 and here I am, still running a Mac Pro 1,1...   Smiley

Thanks!
Logged
Ghostmik
Newbie

Offline Offline

Posts: 2


« Reply #448 on: May 12, 2015, 02:38:01 PM »

Hello Guys!  Smiley
I hope to have from you some advice about my situation with my Mac Pro 1.1..
I'm little late with this upgrade I know but only in these days I have had the change to upgrade my Mac.
I'm an expert user and have repaired, tweaked, hacked a lot of devices so for me Apple hardware and software are thing that i'm deal with almost every day.

This time I have decide to take time to upgrade my old:


Mac Pro 1.1 (2006)


The upgrade plan was:

- Max Ram 32Gb

- Ssd Boot HD

- Airport Extreme Card

- Mac OS X 10.9.5 with TIAMO Boot (SFOTT)

- Ati Radeon 5770 HD 1Gb (Original Apple not flashed from Pc hardware)

- Netkas 2.1 Firmware Update (since I need to upgrade CPUs for have more computing power)



I have done all of these upgrades successfully without any problems till the CPUs swap..

I have choose to upgrade my Mac Pro with a matched pair of Xeon X5365 (I've already successfully done this kind of operation a lot of times).


After I complete the CPUs swap and bring back all the inside of the Mac Pro (cleaned everything), I also changed the Logic Board Battery,
when were time to turn on, the Mac was "working" but NO CHIME and black screen.


This was the exactly sequence of events:

1) Before proceed to turn on the Mac I have reset the SMC with his own button on the Logic Board for 5 seconds

2) closed the case and attached back the AC plug

3) the Mac immediately turn on WITHOUT pressing the POWER BUTTON (light on the power button is on and stable)

4) Dvd drive turn on, front and rear fan spin normally and the HD drives other than the SSD Boot, spin.

5) No Chime - No Boot - no chance to use keyboard for a NVR reset



Checked immediately the DIAG_LED button:


Led 1 - Trickle Pwr ON

Led 6 - GPU Present ON

Led 7 - Power On ON

Led 8 - EFI Done OFF WHILE SHOUD BE ON (as stated in the Apple Service Manual) Indicates: EFI is done loading



I have try to reset again the SMC and change again the Logic Board Battery but nothing, the Mac start up but NO CHIME.
Swapped out the GPU, no chime, same with the Ram dims, I have try to pull out every dims and leave only 2 in the upper riser althought the memory riser diagnostic leds are all OFF (so no faulty dimms). Also removed Airport Card.

For test purpose I also have try to swap back the old CPUs but the things remain the same; NO CHIME, NO BOOT.


What lead me here before buy a new logic board or power supply is the LED 8 from the DIAGNOSTIC LEDs.


On every post I have find googling around NO ONE  ever report the behave of the Led 8 in they'r Mac Pro:

LED 8 - EFI DONE - In my case OFF while as stated in the Apple Service Manual, should be ON.


also notice that  Led 6 - GPU Present in my case the light is ON also if the GPU card is pulled out, strange uh?


Could someone here please help me to understand better what's happen to my Mac Pro?



The only other clue I can provide about a strange behave of my Mac before the upgrade is that from about a year ago after I have installed the ATI RADEON 5770 HD Instead of his standard GPU, when I hit the POWER BUTTON, before to hear the CHIME I had to what 5-10 seconds and after the Netkas 2.1 Firmware Update the time to have the CHIME was the same.

This delay of the chime sound could be related with the LED 8 EFI DONE OFF?

I also have try to PUSH the Power Button for 10 seconds for check if I eventually could be able to restore the original EFI but doesn't work, the light of the power button remain ON and don't blink.

What's happen could be related to the 2.1 Firmware Update?

I notice the the Netkas 2.1 Firmware Update for Mac Pro 1.1 in my case update only the Firmware and not the SMC (still 1.7f10), is this normal?


Thanks in advance to everyone….






Mik
Logged
hugo_za
Newbie

Offline Offline

Posts: 1


« Reply #449 on: July 07, 2015, 01:46:25 PM »

Thanks to all for this awesome thread and app. I just recently acquired a Mac Pro 1.1 with the intention of using it as our home server (which it's doing super well). I am going to bump the spec up to 8 core, 32gb ram, a new GPU and Yosemite.

My first attempts at using the 1,1 -> 2,1 update were met with a reboot each time. It finally worked when I unplugged the superdrive. Reboot back into the OS, and as expected only 1 CPU showed up. Reboot once more and cleared the NVRam. All working as expected now.
Logged
Pages: 1 ... 28 29 [30] 31 32 ... 34
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!