netkas.org forum

General Category => PC EFI => Topic started by: paulposition on December 19, 2007, 10:22:50 PM



Title: Leo doesn't boot after EFI installation
Post by: paulposition on December 19, 2007, 10:22:50 PM
Hi all,
i'd a working leo, installed via amd-flat image + toH kernel + nvinject.
Now i've installed Pc EFI v8 but leo doesn't boot, also in single mode, always kernel panic  ???
is it possible to remove EFI?
i've tiger working perfectly on secondary ide and i can full access leo volume.
thanks
ciao
Paul


Title: Re: Leo doesn't boot after EFI installation
Post by: netkas on December 20, 2007, 11:16:30 PM
just isntall boot file (via startupfiletool) from x86 dvd (usr/standalone/i386/boot)


Title: Re: Leo doesn't boot after EFI installation
Post by: tony1446 on December 28, 2007, 09:53:46 PM
Here is how I got EFI to work...

CODE

cd pc_efi_v80_location

./Startupfiletool /dev/rdisk0s2 ./boot_v8

dd if=./guid/boot1h of=/dev/rdisk0s2 bs=512 count=1

diskutil umount /Volumes/Leopard

dd if=/guid/boot0 of=/dev/disk0 bs=400 count=`

reboot


I hope this helps...

Regards,

Tony